Smog Check in Riverside, CA

Yes. Riverside is located in California, which requires smog check statewide. If your vehicle is registered in California, you must pass a Smog Check before you can renew your registration.

California's program, the Smog Check Program, requires periodic testing for most gasoline-powered vehicles above a certain model year. The program is administered by the Bureau of Automotive Repair (BAR), under Dept. of Consumer Affairs.

For the full breakdown of California's rules, including exemption details, testing frequency, waiver thresholds, and registration deadlines, see our California Smog Check requirements page.

Drive your vehicle for at least 15 to 20 minutes before arriving at the station. This warms up the engine and catalytic converter and helps readiness monitors complete their cycles. Highway driving at consistent speeds is more effective than stop-and-go city traffic for completing readiness cycles.

Do not clear diagnostic trouble codes or disconnect your battery in the days before your test. Cleared codes reset readiness monitors and will cause a rejection even if nothing is mechanically wrong with your vehicle.

Make sure your check engine light is off. A lit check engine light is an automatic failure in every OBD-II emissions program. If the light is on, have the issue diagnosed and repaired before scheduling your test.

Check that your gas cap seals properly. A loose or cracked gas cap is one of the most common and least expensive reasons for a failed evaporative emissions test. Bring your current registration or any renewal notice you have received. Some stations may also ask for your vehicle identification number.